Swain Tech Coatings
Home Page
About Us
Industrial Coatings
Racing Coatings
Contact Us
Sign Up


Motorcycle Coatings and Two Cycle Coatings Price Sheet

Swain Tech Coatings Order Sheet

Pistons

TBC on Dome and Poly Moly on Skirt ……................ $32.00 each
*TBC on Dome and PC-9 on Skirt* ………................. $38.00 each
Gold Coat on Dome and Poly Moly on Skirt .............. $48.00 each
Gold Coat on Dome and PC-9 on Skirt ……............... $52.50 each
Dome Only with TBC ………………………................. $24.50 each
Dome Only with Gold Coat ……..………................... $42.50 each
Skirt Only with Poly Moly …....…………...…............. $14.00 each
Skirt Only with PC-9 ………………….…................…. $18.00 each
Heavy Skit Build up with PC-9 (.002-.004”)…….......... $24.00 each

*Recommended for most applications.

STEALTH COAT ™ is a coating that will allow parts to remain “stock appearing” after coating. Our TBC and PM can be applied in STEALTH form when applied to pistons, combustion chambers and valve faces. Add 10% to standard prices when asking for STEALTH.

Cylinder Heads - TBC™ Thermal Barrier Coating in Combustion Chambers and on Valve Faces

6 Cylinder (pair or inline) ………………..............…... $230.00
4 Cylinder Inline ………………………...............……. $200.00 each
3 Cylinder ............................................................ $125 each
2 Cylinder Head …………………………...............…. $80.00 each
Single Cylinder (Liquid or Air Cooled) ….................. $42.50 each
Single Exhaust Ports (when coating chambers) ...... $12.00 each
2 into 1 Exhaust Ports (when coating chambers) .... $18.00 each
Exhaust Ports 2 Cycle TBC …………………........... $55.00 each
Briggs Exhaust Port TBC ……………..................... $40.00 each

Flow Coating for Intake Ports

Single Intake Ports (when coating chambers) ...… $25.00 each

2 into 1 Intake Ports (when coating chamber) …...

 $28.00 each

BBE for Heads and Cylinders

Heads BBE External Coating (per cylinder) ....... $45 - 85/cyl.

Cylinders BBE External Coating (per cylinder)

$65 - 125/cyl.

*BBE cannot be applied to Powder Coated Parts

Valve and Valve Train Components

Face and Radius Side (TBC) …...…………… $14.00 each
Face Only (TBC) ……………………………… $10.00 each
Radius Side Only (TBC) …………………….. $10.00 each
Stem (PPM Low Friction) …………………… $8.00 each
Valve Springs (Set of 16 PPM Low Friction) $125.00 set
Pair of Valve Springs PPM Low Friction ….. $8.00 each

Engine Bottom End Components

Bearings PPM Single Shell………………… $8.00 each
Crank Shaft Oil Shedding………………….. $110-170.00 ea.
Connecting Rods Oil Shedding …………... $25.00 each

White Lightning (TBC-EX) Exhaust Coating

Due to the tremendous variations of part configuration, coating prices are estimates only. Exact pricing is based on the actual processing of each specific part. Used parts can be coated. Stripping paint, rust or a previous coating may require an additional charge.

Nobody can get a coating to permanently bond all the way through an exhaust tube unless it is very short and open from both sides. We do not coat the inside of turbo parts so be sure to let us know if you are sending turbo parts so we can mask them properly. Naturally aspirated pipes may be coated on the inside if it looks like the coating will not interfere with the mounting of the pipe to the head or the mating part. If you have any specific masking requirements, be certain to let us know where you want the part to be masked so we know what you are looking for.

Snowmobile or Jet Ski

Triple Pipe ………………………………. $225 - 275
Twin Pipe …………………………........ $150 - 175
Single Pipe …………………………….. $85 - 110
Header Flange …………………………. $10 - 20
Muffler (Box, Silencer, Stinger, etc) $30 - 80
Y-Pipe ………………………............... $20 - 35

Motorcycle & Kart

4 into 1 Header………………………….......... $125 - 165
2 into 1 Header………………………….......... $40/foot
2 cycle expansion chamber ........................ $85 - 135
Briggs Pipe ……………………………........... $40/foot
Yamaha Kart Pipe ……………………........... $85
Misc. Tubing and Single Header Pipes ........ $40/foot

TBC – A ceramic Thermal Barrier Coating for engine parts. Applied about .002” thick.

Gold Coat Ceramic Armor – A ceramic Thermal Barrier Coating designed specifically for piston domes in extreme applications such as nitrous, turbo and superchargers. Applied about .003” thick.

Poly Moly – A low friction, anti-seize, self lubricating coating. Applied about .0008” thick when applied to piston skirts.

PC-9 – The latest and most durable piston skirt coating and other applications. Applied about .0008” thick when applied to piston skirts.

PPM – A thin, high load solid film lubricant used for parts with little or no room for a coating. Bearings and other parts are often coated with PPM. Applied about .0002” thick.

White Lightning (TBC-EX) – A ceramic thermal barrier primarily used on the outside of exhaust parts. Applied approximately .015” thick.

BBE – A heat radiating coating to dissipate heat and improve cooling.

Flow Coat – Non-wetable low friction coating.


 
 
 
 

Site Map

© 2008 Swain Tech Coatings